The indicator light is not on. 11-socket can be used with the keyboard. 11 can be used last night.
Addition: Wired, no water
Welcome Guest.
The indicator light is not on. 11-socket can be used with the keyboard. 11 can be used last night.
Addition: Wired, no water
+7Votes
The keyboard is out of order and the indicator light is off. Check whether the keyboard indicator lights up when booting. If it is not lit after booting to enter the system, it is the keyboard fault. If it is turned off, you need to restart the computer and press F8. Check to see if it is back to normal in safe mode.
1. If the situation in the security mode is still determined to be a malfunction of the keyboard itself, it needs to be replaced or contacted by the brand for after-sales solution.
2. If the security mode can use the keyboard normally, it is a USB driver problem. Restart the computer and enter the system. After opening the security guard-software housekeeper, click the start-running bar and enter “osk” to enter the soft keyboard. Click on the soft keyboard and type “qdrs” to search for the installation driver life 7. After opening, check and repair the USB keyboard driver to restore normal.
+1Votes
, you can use the mouse, if not, then the usb driver has a problem.
+8Votes
If it is USB, try another interface, use 360 driver to fix the driver. If it is PS2, it should be a keyboard problem
+8Votes
It is recommended to try another keyboard
+3Votes
We follow the simplest stripe type, each time generating an image, this image is in the range of the distance, in the azimuth You need to choose the right length based on the computing power of your system.
In SAR, there is no such concept as the drawing cycle. The sampling is always running, and the data processing is run in the background. The area to be imaged is extended by half an aperture, and then the distance compression is compressed.
+6Votes
It should be broken
+5Votes
Change a new one.
+7Votes
Check keyboard wiring
+1Votes
Try another socket
+6Votes
Try to change the keyboard, you know, the keyboard is broken, there is no sign.
+4Votes
If you can’t plug it, it’s broken.
+4Votes
If you have no problems with the peripherals, then just re-drive it.
+5Votes
USB, try to update the driver.
+5Votes
See if it is a bad contact
+3Votes
Try a different socket
+6Votes
Check other computers Try it, if not, it means that the keyboard is scrapped
+8Votes
Re-plug it and try it out.
+4Votes
Try another interface and try again.
+5Votes
Look at the interface problem, generally all invalid, it is probably an interface problem.
+8Votes
Try for a computer
+4Votes
Unpack and clean up