Welcome Guest.


How to remove the black nozzle from Canon g2800 printer

Asked by: Betty Morgan 242 views Hardware April 2, 2019

Addition: Normal print black is gray, and horizontal stripes. Photo prints are gray, no horizontal stripes, no problem with color, what is going on.

4 Answers

  1. +8Votes  

    There are three steps to remove and wash.

    Method 1: After the computer is installed with the driver, it has its own cleaning program; click the start button, the control panel, there is a printer and fax machine, click on, find the Canon 1100 printer driver, right click, There is a printer preference inside, the last one is maintenance, there is deep cleaning, click, execute on the line;

    Method 2: Remove the nozzle, soak the head with warm water, but be careful not to put the chip Wet it.

    Printer manual cleaning method:

    Step 1. Manual cleaning should be removed according to the steps in the operation manual.

    Step 2. Manually clean the print head. A small rubber tube can be placed at the front end of the medical injector. It is filled with strictly filtered water. When flushing, carefully observe the spray hole with a magnifying glass, such as siltation next to the spray hole. Residues can be removed with a soft gelatinous product. The integrated print head that has been left unused for a long time blocks the nozzle hole due to dry ink, and can be washed with hot water before cleaning.

    The following points should be noted when cleaning the print head:

    1. Do not use sharp objects to clean the nozzles, do not hit the nozzles, and do not touch the nozzles by hand;

    2 Do not disassemble or install the nozzle under power. Do not touch the electrical contacts on the nozzle with your hands or other objects.

    3. The nozzle cannot be removed from the printer and placed separately. Dusty place.

    Step 3. Follow the steps in the operating manual to install the printhead.

    Mary- April 2, 2019 |

  2. +3Votes  

    Seeing the manual is the most basic

    Robert Brown- April 2, 2019 |

  3. +4Votes  

    Do not operate by yourself, or ask a professional

    Elizabeth Harrison- April 2, 2019 |

  4. +1Votes  

    Hello friends, long press the printer stop button for about 3-5 seconds, remove the nozzle in the ink cartridge, if it is not effective after cleaning, it is recommended to replace the new print nozzle.

    Martin- April 2, 2019 |