20Answers
After the main machine is turned on, everything will be shut down automatically after 30 minutes unplug the mechanical hard disk solid state drive graphic card replace the memory module position or shut down
Asked by: Pamela 157 views Hardware
Download 360 driver master motherboard graphics card driver upgrade Do not ask for the big gods pointing
Addition: The host is 30 minutes of automatic power off abnormal shutdown, the CPU temperature is normal after shutdown, the power supply finds a test It doesn't work, it will be powered off at the time
Addition: The system is still the same
+5Votes
Two possibilities, one is that the system has some kind of timed shutdown virus, you can use the anti-virus software to check or format the hard disk, then re-install the clean system; the second is the computer cooling failure, overheating after work, this situation Need to find hot spots to improve heat dissipation. If it is stable and shuts down automatically in 30 minutes, the first possibility is even greater.
+5Votes
It is estimated that the virus is in your system
+8Votes
If you shut down on time every 30 minutes, it is automatically set by you. Function.
+1Votes
Recommended to reinstall the system.
+1Votes
This situation is initially suspected of CPU problems, is a hardware problem, need to go to the professional repair computer where to detect
+6Votes
reinstall the system to see.
+5Votes
It may be caused by too hot CPU
+6Votes
It is too hot to be estimated
+2Votes
First use Master Lu Check the hardware, not reinstall the system
+6Votes
Is the machine shut down after overheating, it may be a fan
#p>#p>Reinstalling the system
+8Votes
There you can reinstall the system and try it out!
+4Votes
Just judge the CPU fan or power problem
+5Votes
Automatically shut down after 30 minutes of main operation after the main machine is turned on Unplug the mechanical hard disk in turn Solid state drive graphics card is still turned off after replacing the memory stick position, indicating the reason of the motherboard. If the conditions permit, it is recommended to change to the MAC computer
+6Votes
Generally it is a hardware problem, you can check
+5Votes
Is there any garbled? Look at the overheating alarm, blow the dust
+8Votes
The next temperature monitoring, clean the host dust, and now the weather is hot, is the temperature too high, automatically shut down. . . .
+7Votes
First, boot into the BIOS may be the BIOS battery is not power, if it is, replace the BIOS battery. If it doesn’t work, fix the system.
Second, 1, boot F8 does not move to the advanced option appears in the loose hand, select “last time the correct configuration” Enter to repair.
2, please press F8 to enter the safe mode and restore the system with the system’s own system, restore to the time you did not have this fault.
3, if the fault remains, use the system disk repair, open a command prompt to enter SFC / SCANNOW Enter (a space between SFC and /), insert the original system disk repair system, the system will automatically compare the repair.
4, if the fault remains, set the CD-ROM drive in the BIOS to insert the system boot disk into the first boot device, press R to select “repair installation”.
5, if the fault persists, it is recommended to reinstall the operating system.
Third, if it is not, it is recommended to choose to repair the installation, which will repair the system, and can make the C disk programs and files without loss.
+8Votes
Is the CPU overheated
+2Votes
This is a good way for people who specialize in computer repairs to see maybe it is a program problem?
+4Votes
Estimated power or CPU problem