Asked by: John Hughes142 viewsComputerApril 29, 2021
In this computer power interface, I can't open the fan. I stopped and stopped and stopped.
5 Answers
+3Votes
The situation of your computer is not the problem of this interface, you can unplug the memory bar to clean the dust inside the slot, then rub the memory of the memory with the eraser, there is no rubber, you can use alcohol. After wiped clean, it is usually no problem. It is generally no problem.
Sean Simpson- April 29, 2021|
+6Votes
This is a 4pin power plug, it is a spare extension header, no need to pick up, the computer will appear, may be memory contact Poor, may also be a motherboard problem, after turning off, try the memory plug and try again.
Antonio Reynolds- April 29, 2021|
+5Votes
This is a vintage hard disk power supply, and it is not used, which is generally not connected, but it can be powered by the chassis fan.
Your payment is estimated to be a memory problem, and if you remove the memory, you can see if it is still like this, clean the memory contact point, plug it.
Dennis Murphy- April 29, 2021|
+6Votes
This is a mechanical hard disk and a fan power supply large 4D interface fan stop is which hardware is not plugged back and try the motherboard, two power supply is a motherboard 24PIN power supply and 4P Or 8pcpu power supply these two plugs no problem
+3Votes
The situation of your computer is not the problem of this interface, you can unplug the memory bar to clean the dust inside the slot, then rub the memory of the memory with the eraser, there is no rubber, you can use alcohol. After wiped clean, it is usually no problem. It is generally no problem.
+6Votes
This is a 4pin power plug, it is a spare extension header, no need to pick up, the computer will appear, may be memory contact Poor, may also be a motherboard problem, after turning off, try the memory plug and try again.
+5Votes
This is a vintage hard disk power supply, and it is not used, which is generally not connected, but it can be powered by the chassis fan.
Your payment is estimated to be a memory problem, and if you remove the memory, you can see if it is still like this, clean the memory contact point, plug it.
+6Votes
This is a mechanical hard disk and a fan power supply large 4D interface fan stop is which hardware is not plugged back and try the motherboard, two power supply is a motherboard 24PIN power supply and 4P Or 8pcpu power supply these two plugs no problem
+8Votes
change the fan to see