Welcome Guest.

1Answers

There is no sound when the computer is played.

Asked by: Sandra Robinson 89 views Computer January 22, 2022

There is no sound when the computer is played.

1 Answers

  1. +1Votes  

    There is no sound when the computer is played, first to confirm that the hardware is fine.

    You have already said that the speaker has no problem, the sound card is no problem, confirming that all the cables are completely correct. Then open the speaker power supply, and the volume switch is turned on. If you have tested it in other machines, you can continue to look down.

    Second, properly install the sound card driver

    If you are a board, you’d better install the drivers provided on the motherboard driver disk. If the sound driver is not installed, a yellow “?” Or in sound, video and game controller, the sound audio controller has a yellow “!”! “!

    If prompted when installing the HD Audio sound card driver: “The HD Audio bus driver is required, but no found.” Installing a UAA patch can solve this problem (click to go to the download page). In fact, the computer does not sound, many times because the sound card is not driven. In general, after the sound card is installed, there will be a small speaker icon in the task bar in the lower right corner)

    Third, if the driver is properly installed, then take a look at the volume setting in the computer.

    The above is a relatively common troubleshooting method. . . . . .

    I often have netizens to put forward, I play MP3 locally, the songs have sounds, why do you open the website to watch the video without a sound? ?

    In the local play, you have a sound, you also prove your sound card, headphones (speakers), all the drivers are all normal, and basically belongs to the setting problem. . . .

    First check if the web player is open. .

    If you use IE, open the tool – Internet option —- Advanced, see if you have opened it.

    If you are a tour browser, there is a sound icon on the bottom right corner of the browser, you check it down. . .

    Of course, the settings of other browsers are similar, but also you need to check it carefully.

    The specific method is to double-click the icon of the small speaker in the taskbar. In the pop-up “Volume Control” dialog box, it is not the minimum volume, or is set to a quiet state. .

    If there is no two options in the dialog box, click the “Options” menu – Select “Properties” – Select “Volume Control” and “Waveform” in “Show Label Control”, and then make correct settings.

    Check whether the volume mediation switch on the headset speaker is toned to the smallest, or mute. Check if Windows comes with the volume of the Software RealPlayer and Windows Media Player, whether it is minimized, or mute.

    Now some sound cards, interface sensing, such as you plug in audio or headphones, let you choose what device you plugged in, you may cause no sound, you must set it right here. .

    Special reminder: In fact, many times the reason for the abnormal work is small, soft fault, careful analysis, many times can easily solve problems.

    Fourth, users who are unfamiliar with BIOS may be mistakenly obscured on the plate.

    Enter BIOS, select I / O Device Configuration → Onboard AC97 Audio Controller, select Enanle or Auto. My ASUS motherboard, other due to the difference between the motherboard, or the BIOS version is different, there may be some differences, but it is basically similar, if it is award BIOS, enter the “intergrade peripherals” in the BIOS, select “AC97 Audio” change ” Disable “Save” Auto “can be saved.

    5. After installing a network card or other equipment, the sound card is no longer sound.

    This problem is relatively representative, mostly due to compatibility issues and interrupt conflicts.

    The problem with drive compatibility is better, and the user can update the driver of each product. The interrupt conflict is more troublesome. First enter the Control Panel → System → Device Manager, query the respective IRQ interrupts, and can directly set IRQ directly, and eliminate the conflict. If the device manager cannot eliminate conflicts, the best way is to return to the BIOS, turn off some unwanted devices, empty excess IRQ interrupts. You can also change your network card or other device, which will also change the respective IRQ interrupt to eliminate collisions. After changing the slot, you should enter the “PNP / PCI” item in the BIOS to enable “RESET Configuration Data” to Enable, empty the PCI device table, and reassign the IRQ interrupt.

    Edwards- January 22, 2022 |