Welcome Guest.

13Answers

Computer W button fails

Asked by: Stephen Fox 36 views Computer July 17, 2022

I long press the key for a period of time and release it, and then even if I do not press the W key, the computer will automatically press the W key within at least thirty seconds, even if I press the W key or double -click the W key againIt is still impossible to unlock the computer's automatic press W key; and sometimes press the W key to respond.This has caused great obstacles to my operation in the process of playing games. Does anyone know how this situation is solved?Thank you!

13 Answers

  1. +1Votes  

    If it is a mechanical keyboard, you can replace the axis (if it is a welding axis, you can melt the fixed axis welding with an electric iron). If it is a thin film keyboard, you can replace the leather bowl under the key. If it is the built -in keyboard of the notebook, You can only replace the notebook keyboard (if you suspect that the built -in keyboard is expensive, you can unplug the connection lines of the built -in keyboard, not recommended for non -professionals to use this method) and then connect to the keyboard

    Jeffrey- July 18, 2022 |

  2. +1Votes  

    You can consider Replace the keyboard and solve it directly from the root cause of the problem.

    Diane Parker- July 19, 2022 |

  3. +7Votes  

    If it is a thin film keyboard, you can change the leather bowl under the key.>

    Jane Clarke- July 19, 2022 |

  4. +2Votes  

    It is best to change a keyboard

    Robin Richardson- July 19, 2022 |

  5. +7Votes  

    Friends, your keyboard w key, you need to open and repair

    Diane Palmer- July 19, 2022 |

  6. +7Votes  

    Press the key sticky stagnation, either changing the keyboard, or the external keyboard.

    Lori Price- July 20, 2022 |

  7. +8Votes  

    One, the keyboard key circuit board is broken, you need to change the new keyboard.

    Two, the contact point of the W key inside the keyboard has poor contact points, and you need to remove the inspection and clean up.

    Three, the W -key has a flexible cushion, which is mainly manifested by pressing it in time and unable to play in time. It needs to be disassembled and replaced with a bowl -shaped cushion.

    Of course, if the conditions are not available, it is most suitable to change a new keyboard.

    Charles Hall- July 20, 2022 |

  8. +7Votes  

    This key is the most likely, the most likely is the dirty of the conductive rubber wear or the conductive rubber powder under the circuit. If you open it to see if this is the case, you need to wash and dry it with waterless wine or change the conductive rubber. The possibility of decoding circuit failure is relatively small.

    Sara Phillips- July 20, 2022 |

  9. +6Votes  

    It must be that you always knock the W key when you knock on the keyboard, and you are knocked down by you. You can take the button first and see if the inside is not bad. There is no good way, either try to use 502 to stick to 502. If it does not affect your use, buy a new

    Adam Adams- July 20, 2022 |

  10. +6Votes  

    Click AIT+W to reset [Suggestion+3 ] Or any key

    Henry Cooper- July 21, 2022 |

  11. +5Votes  

    1 Connect the keyboard to the USB cable of the computer host and the USB interface of the computer host to reintegrate. Because there are multiple USB interfaces behind the desktop computer host, you can also change a USB port. Connect to see if you are in good contact; 2. Repeat and fail the surrounding letters. For the above phenomenon, it is usually because a key position is stuck and is always pressed and the peripheral key positions are connected to the conductive rubber to intermittent contact with it. The keyboard fails. For this situation, you can use your fingers to repeat the key to some key positions that appear to fail, or press all the key positions again to make the keyboard normal; The dust or snack debris enters the inside of the keyboard, which hinders the contact with the conductive rubber and the circuit board metal contacts under the key position to make the letters cannot be input and display. In response to this situation, you can use the keyboard vacuum cleaner with a soft brush and blow a balloon to blow the dust debris to solve the problem. If the above method cannot be solved, please disconnect the connection between the keyboard and the computer host , Poly keyboard, after alignment, re -connect it to work normally.

    Dorothy- July 21, 2022 |

  12. +5Votes  

    Find someone to repair it! no way.

    Patricia Graham- July 21, 2022 |

  13. +7Votes  

    Change the keyboard, or make a key pad

    Willie Knight- July 21, 2022 |