Welcome Guest.

10Answers

After the computer is reinstalled, the system does not turn on.

Asked by: Marie Phillips 205 views Computer September 4, 2018

Press F8, F12 is useless, a small minus sign, flashing and flashing does not stop, I know to change the system, I want to ask someone to meet this situation, hey, I am a computer white

Addition: Computer, can't put CD

Addition: To say more details

10 Answers

  1. +6Votes  

    The system was not installed successfully, reinstall!

    Christopher Morgan- September 4, 2018 |

  2. +8Votes  

    This phenomenon is that the partition format is wrong when installing the system. It is recommended that you use the original system installation, use the U disk pe system to install, it is not recommended to use the GHOST system, this system is generally

    Christopher Scott- September 4, 2018 |

  3. +5Votes  

    reinstalling the system with the back door is no problem, download a Chinese cabbage u disk software, then find a u disk with the best 8g or more, then use the software to burn, then download the The iso system is copied into the folder iso after the u disk is burned, so that the u disk loading system can be booted. Of course, there is a trick here, that is, the u disk starts. In the boot screen, find a key of f, followed by the word pop menu, press this button, the quick start menu will appear, then you can choose u disk, CD, and hard disk boot, of course, choose u disk Then you can use the u disk to install the system.

    Joseph Williams- September 4, 2018 |

  4. +4Votes  

    It’s all about making money, it’s not kind. Seeing this problem, I feel that there is a problem during the system installation. If it is after the normal installation and restart, it means that this system is not suitable for your hardware. You must change the system. This must be clearly defined. IDE, or AHCI, partition mode is GPT partition or MBR partition. According to these to choose the right system, it does not mean that a system can be installed, especially the mirror installation class produced by GHOST. The current method can only make a U disk boot disk. This is also very particular, and the related content is many online. You can watch the tutorial and start the machine to install a suitable system. Your problem description is not very clear, you can’t give a more specific way. It is important to describe the problem, but more important is the process of generating this phenomenon, so that it is easier to give a more concrete solution, hope to help your turn.

    Michelle Harris- September 4, 2018 |

  5. +3Votes  

    The system installation was unsuccessful, the startup file is missing, reinstall

    Amy King- September 4, 2018 |

  6. +1Votes  

            1. Is the light bright? If it is the best to check the power of the chassis, the time is too dirty, sometimes the power will be out of this problem, remove the power and clean it, if not, then try another power supply.                                                        2. Re-partition means to see if you can enter the hard disk from the BIOS, otherwise there is a problem with the hard drive data cable or hard disk,

    Question: The BIOS has to press that key

    Linda Martin- September 4, 2018 |

  7. +7Votes  

    The system does not boot

    Mark- September 4, 2018 |

  8. +4Votes  

    First, make a winPE system on the USB flash drive, use it to boot the computer, and install the system without problems.

    Smith- September 4, 2018 |

  9. +8Votes  

    Using a USB flash drive to make a system

    Dennis Green- September 4, 2018 |

  10. +8Votes  

    Installing the system after repartitioning

    Question: Can you elaborate?

    Answer: Re-partition means to see if you can enter the hard disk from the BIOS, otherwise there is a problem with the hard drive data cable or hard disk,

    Dennis Thomas- September 4, 2018 |