1, enter the BIOS after reboot, BIOS entry method: press F1.F2 when booting. F10 or DEL, or see the prompt when starting up (take F1 as an example) “Please press F1”.
2. Find “CPU Configuration” in the BIOS and press Enter to enter.
3, you will see “Inter Virtualization Teach”, move the cursor to this, press Enter, select “Enabled”, if you have “Execute-Disable Bit Capability” or “Inter vt-d”, changed to “Enabled” together, if not, ignore.
4, finally press F10, prompt “Save configuration changes and exit setup?”, select OK. carry out. Second, ASUS motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2.F10 or DEL when booting, or see the prompt when booting (take F1 as an example) “Please press F1”.
2, go to “Advanced Mode” – “Advanced” – “Processor Settings”.
Three, MSI motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2.F10 or DEL when booting, or see the prompt when booting (with F1 as Example) “Please press F1”.
2, you will see “Inter Virtualization Teach”, move the cursor to this, press Enter, select “Enabled”, if there is “Execute-Disable Bit Capability” on the BIOS Or “Inter vt-d”, change to “Enabled” together, if not, ignore it. Fourth, GIGABYTE motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2.F10 or DEL when booting, or see the prompt when booting (take F1 as an example) “Please press F1”.
2, select “BIOS Features”
3, then you will see “Inter Virtualization Teach”, move the cursor to this, press Enter, select “Enabled” “If you have “Execute-Disable Bit Capability” or “Inter vt-d” on your BIOS, change it to “Enabled”, if not, ignore it.
+7Votes
Manually open
I. Biostar motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2 when booting. F10 or DEL, or see the prompt when starting up (take F1 as an example) “Please press F1”.
2. Find “CPU Configuration” in the BIOS and press Enter to enter.
3, you will see “Inter Virtualization Teach”, move the cursor to this, press Enter, select “Enabled”, if you have “Execute-Disable Bit Capability” or “Inter vt-d”, changed to “Enabled” together, if not, ignore.
4, finally press F10, prompt “Save configuration changes and exit setup?”, select OK. carry out. Second, ASUS motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2.F10 or DEL when booting, or see the prompt when booting (take F1 as an example) “Please press F1”.
2, go to “Advanced Mode” – “Advanced” – “Processor Settings”.
Three, MSI motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2.F10 or DEL when booting, or see the prompt when booting (with F1 as Example) “Please press F1”.
2, you will see “Inter Virtualization Teach”, move the cursor to this, press Enter, select “Enabled”, if there is “Execute-Disable Bit Capability” on the BIOS Or “Inter vt-d”, change to “Enabled” together, if not, ignore it. Fourth, GIGABYTE motherboard
1, enter the BIOS after reboot, BIOS entry method: press F1.F2.F10 or DEL when booting, or see the prompt when booting (take F1 as an example) “Please press F1”.
2, select “BIOS Features”
3, then you will see “Inter Virtualization Teach”, move the cursor to this, press Enter, select “Enabled” “If you have “Execute-Disable Bit Capability” or “Inter vt-d” on your BIOS, change it to “Enabled”, if not, ignore it.